Dyson Bladeless White Oscillating Desk Fan - 10 Inch
Special offer Cost: £249.99 Ex VAT
Rental Cost: £POA (12 Week Min Rental)


Product Description:
The Dyson 10” desk fan is a bladeless desk fan engineered to deliver a constant stream of smooth air with no unpleasant buffeting. Dyson engineers have eliminated the need for blades using Air Multiplier technology. Bladeless technology this desk fan gathers less dust and is easier to clean. An annular jet draws in surrounding air, multiplying it 15 times. The air multiplier desk fan pivots on its own center of gravity, staying put without clamping.

Key Features
• White and silver finish
• 1 speed setting
• Adjustable tilt
• Oscillating
• Easy to clean technology
• Size H50, W31, D15cm

Dyson 2kW Oscillating Cold & Hot Air Fan Heater
Special Offer Cost: £389.99 Ex VAT
Rental Cost: £POA (12 Week Min Rental)

Product Description:
The Dyson Air Multiplier™ technology Air is drawn in at the base of the machine. It is accelerated through a 2.5mm aperture, which creates an annular jet of air that passes over an airfoil-shaped ramp, channelling its direction. Surrounding air is drawn into the airflow, amplifying it. Unlike with conventional fan heaters or fans, there are no chopping blades, so there’s no buffeting. Airflow is smooth.

Key Features
• Heater technology: PTC ceramic heater
• Number of speed settings: 10
• User Buttons: Remote Control
• Oscillation: 80 degree span
• Touch-tilt: 10 degrees either way from upright position
• Temperature settings: To the degree
• Digital display: LED temperature display
• Dimensions: 579x153x200 mm (HxWxD)

Dyson AB14G Airblade Mk3 Grey Polycarbon ABS Blade Hand Dryer 1.6kW 22.00
CW2AC Purchase Cost: £765.99 +VAT


Product Description:
The newly designed scallop shaped apertures on the AB14 hand dryer reduce 'air-rush' and unpleasant motor tones have been reduced to enable the unit to run 50% quieter making it the ideal solution where washroom noise levels require consideration. The AB14 MK3 hand dryer benefits from the Version 4 motor and uses 80 percent less energy than a conventional warm air hand dryer, the fully automatic, non-heated Dyson Airblade uses 400MPH sheets of air to literally scrape the water from your hands giving a drying time of 10 seconds. Additionally, hospital standard anti-microbial filters are used to remove 99.9 percent of bacteria.

Key Features
• HEPA air intake filters
• Eliminates up to 90per cent of surface bacteria
• Acoustically re-engineered to reduct noise levels by 50%
• HACCP approved as safe for use in the goods and beverage   industry
• Incorporates six Helmholtz silencers to greatly reduce noise   levels
• Touch Free operation activated by Infra-red sensors
• Greatly reduced running costs
• 240v 1600w power consumption
• Motor digitally switches 6,000 times per second to enhance   motor speed
• Version 4 Fan Motor has speed of 90,000 rpm
• IPX5 Rated
• Dyson Airblade hand dryers produce up to 72 per cent less   CO2 than some other hand dryers and up to 68 per cent less   than paper towels
• NSF approved - No other hand dryer meets every part of the   NSF Protocol 335
• Weight: 10 kg
• Dimensions: 663mm High x 307mm Wide x 247mm Deep

Dyson AB08SN Airblade V Spayed Nickel Polycarbonate ABS Hand Dryer 1.6kW
CW2AC Purchase Cost: £595.99 (Grey) + VAT
CW2AC Purchase Cost: £575.99 (White) + VAT


Product Description:
The NEW Dyson Airblade V AB08SN is the newest addition to the Airblade™ family. Unlike the blade style Dyson Airblade hand dryers (AB06 / AB07), this is a high speed low-energy hands-under hand dryer. It utilises the same Dyson digital motor which was seven years in the making - it's one of the world's smallest fully-integrated 1600W motors. AB08SN has a sprayed Satin Nickel casing made from an extremely tough, ABS polycarbonate. It dries hands in 10 seconds, suitable for smaller washrooms or tighter spaces.

Key Features
• Slim profile - Protrudes just four inches from the wall. No   recessing required.
• 10 second dry time - Sheets of air travelling at over 430mph   scrape water from hands like a windscreen wiper
• The most hygienic hand dryer - A HEPA filter removes 99.9% of   bacteria from the air used to dry hands
• Costs less to run - Dries 17 pairs of hands for the price of a   single paper towel.
• NSF approved - (National Sanitation Foundation) No other hand   dryers fully meet Protocol 335
• Small carbon footprint - Dyson Airblade™ hand dryers produce   at least 67% less CO2 than some other hand dryers and 62%   less than paper towels
• 60% smaller - The same drying performance as the original   Dyson Airblade™ hand dryer but 60% smaller
• Dries each hand separately - V-configuration separates hands,   drying them quickly and evenly
• Touch-free operation - Capacitive sensors activate air
• Antimicrobial coating - Eliminates up to 99.9% of surface   bacteria
• Easy to service - Safe electrical disconnect
• Quick to clean - Small surface area. Smooth single piece fascia   with CNC machined air slots

The NEW AB09 Dyson Airblade Tap - Water faucet & hands-under high speed blade hand dryer
Product Purchase Cost: £1,150.00 +VAT


Short Neck
The Dyson Airblade Tap is the newest hand dryer available and one-of-a-kind. It incorporates a sensor operated water tap and a highly efficient, automatic, hands-under hand dryer that uses Dysons blade technology to dry hands at the sink. This means no need for drips on the floor as the user walks from the sink to the dryer It is constructed from marine grade stainless steel Dyson Airblade Tap is still well placed as one of the fastest hand dryer in the market with amazingly fast drying times of approx 12 seconds. The new Dyson digital motor spins at 90000 rpm

New Slim Type

Model name	JT-SB216ESH	JT-SB216GSN
photo
Method	Dual jet airflow drying
Power supply	220-240V/50・60Hz
Heater	On Off	-
Rated current	4.6-5.0A 4.0A	3.5A
Power consumption	Hyper mode 1,010- 650W Week mode 1,200W 220W	560W 130W
Drying time	Hyper mode 3-5sec. 4-6sec Week mode 10-15sec 15-20sec	4-6sec 15-20sec
Airflow rate	Hyper mode 80m/s	80m/s
Noise level	Hyper mode 59dB   Week mode 52dB	59dB 52dB
Dimensions (W x D x H)	300mm x 225mm x 835mm	300mm x 225mm x 733mm
Weight	14kg	12kg
Drain tank	0.8L	0.8L
Motor type	DC brushless motor
Safety components	Temperature fuse Over current breaker

Model name
Photo
Method	Single jet airflow drying
Power supply	220-240V/50・60Hz
Heater	On Off	-
Rated current	2.2-3.5A 1.5-2.3A
Power consumption	High 735-825W 390-455W Standard 475-560W 175-220W
Drying time	High 5-9sec 5-9sec Standard 18-23sec 18-23sec
Airflow rate	140-150m/s 90-100m/s
Noise level	High 62-64dB   Standard 52-54dB
Dimensions (W x D x H)	250mm x 170mm x 480mm
Weight	5kg
Drain tank	0.6L
Motor type	Commutator Motor
Safety components	Temperature fuse Over current breaker

Coolwater4you Other Services
Coolwater4you are a “one stop shop” supplier for Purchase, Rental & Leasing of multi products, In-house Service & Maintenance and Fault Reporting Helpdesk. We have vast experience in both the Corporate, Education and Public Sector Markets and pride ourselves on providing a fast reliable Delivery & Install service, and customer satisfaction is a big priority at Coolwater4you. Just give us a call on 0800 389 5557 to find out more!